Blog

QuickBooks Online Month-End Close Checklist

A month-end close checklist for QuickBooks Online: clear the bank feed, reconcile every account, review the problem accounts, then set a closing date and password.

In brief

A month is closed in QuickBooks Online when every bank, card, and loan account is reconciled to its statement, the holding accounts are empty, the balance sheet makes sense, and a closing date stops anyone from changing the period by accident. The steps below are in the order that saves the most rework. Most companies with a clean file can finish them within the first two weeks of the following month.

This article is general information, not tax or accounting advice.

Before you start

Have these ready:

  • Statements for every bank account, credit card, line of credit, and loan for the month
  • Payout reports from any payment processor that deposits into your bank
  • The payroll register and tax filings for the month, if payroll runs outside QuickBooks
  • Bills and invoices that arrived after month end but belong to the month, if you keep the books on the accrual basis

You also need to sign in as a primary admin or company admin. Intuit's instructions for locking your books require one of those roles to set the closing date.

The checklist

1. Clear the bank feed

Open the bank feed and work every item in the "For review" list through the last day of the month. Match transactions to existing invoices, bills, and payments where you can. Add new ones only when there is nothing to match.

Matching matters more than speed here. If a customer payment was already recorded against an invoice and you also add the bank deposit as new income, revenue is counted twice and the invoice stays open.

2. Enter what the feed does not show

The bank feed only shows money that moved. It does not show:

  • Bills you received but have not paid
  • Invoices you sent that have not been paid
  • Payments made from a personal card or account for the company
  • Non-cash entries such as depreciation or a loan's interest accrual

On the cash basis, you can skip most of these until money moves. On the accrual basis, enter them now, because they belong to the month whether or not they were paid.

3. Empty the holding accounts

QuickBooks has a few accounts where entries wait to be finished. At month end each should be zero or explainable line by line:

  • Payments to deposit (Undeposited Funds). Customer payments that were received but never grouped into a bank deposit. An old balance here usually means deposits were added from the bank feed instead of matched.
  • Uncategorized Income and Uncategorized Expense. Entries saved without a real category.
  • Ask My Accountant, or whatever suspense account your file uses.
  • Opening Balance Equity. It should be zero once a file has been set up correctly. A balance that changes from month to month means someone is creating accounts or entering beginning balances without an offset.

4. Reconcile every account

Reconcile every account that has a statement, not only the main checking account. That includes credit cards, savings, lines of credit, loans, and clearing accounts for payment processors.

For each account:

  1. Enter the ending balance and date from the statement.
  2. Check off the transactions that appear on the statement.
  3. Finish only when the difference is zero.

Do not force a reconciliation with an adjustment entry. A difference means something is missing, duplicated, or dated in the wrong month. Find it. If the beginning balance does not match the prior statement, a reconciled transaction from an earlier month was changed or deleted, and that should be fixed before going on.

Loans need one more check. The balance in QuickBooks should equal the lender's principal balance. If payments were booked entirely to the loan account, interest is missing from the P&L and the loan balance is understated.

5. Tie out the liability accounts

Payroll liabilities, sales tax payable, and credit card balances should each agree with an outside source:

  • Payroll liabilities should agree with the payroll provider's liability report after the month's tax deposits.
  • Sales tax payable should agree with the amount due on the next return.
  • Credit card balances should agree with the statement balance you just reconciled.

A payroll liability balance that grows every month usually means tax payments were coded to an expense account instead of the liability.

6. Review receivables and payables

Run the A/R aging and A/P aging summaries as of month end.

On the receivable side, look for credit balances, which often mean a payment was recorded but not applied to its invoice, and for very old invoices that may need to be written off or collected. On the payable side, look for bills that were paid outside QuickBooks and still show as open.

7. Post the recurring adjustments (accrual basis)

If you keep the books on the accrual basis, post the entries that repeat every month:

  • Depreciation on fixed assets
  • Amortization of prepaid expenses such as annual insurance or software paid up front
  • Accrued expenses for costs incurred but not billed yet
  • Deferred revenue for customer payments received before the work is done

Use the same entries, the same accounts, and roughly the same timing each month. Consistency is what makes month-over-month comparisons mean something.

8. Read the statements

Run the balance sheet and the P&L, with the P&L compared to the prior month and to the same month last year. Read the balance sheet first. Every balance should be one you can explain in a sentence.

Then look at the P&L for movement that does not match what happened in the business. Rent appearing twice, payroll missing for a pay period, or a large expense in a category that is usually small are the kinds of errors this step catches.

9. Set the closing date

When the numbers are final, lock the period. Intuit's steps:

  1. Go to Settings, then Account and settings.
  2. Select the Advanced tab.
  3. In the Accounting section, select Edit.
  4. Turn on Close the books and enter the closing date, usually the last day of the month you just finished.
  5. Choose Allow changes after viewing a warning and entering password.
  6. Select Save.

The password option is the one that actually protects the period. With the warning-only setting, anyone can click through and change a reconciled month. Intuit explains both options in How to enter closing and password protect dates.

10. Save the close packet

Export and save the month's balance sheet, P&L, reconciliation reports, and aging summaries in one folder named for the period. If a lender, a buyer, or the IRS asks about the month later, you will have the version that was final at the time.

How long should a close take?

There is no rule. A company with one bank account, one card, and a few dozen transactions can close in an hour once the bank feed is clean. A company with several processors, inventory, and payroll in multiple states will take longer.

The more useful target is consistency: close by the same working day every month. A month that is not closed by the time the next one ends tends to stay open, and the backlog grows. If you are already several months behind, QuickBooks cleanup cost explains how backlog months are counted and priced.

Cash basis or accrual basis?

Many companies keep the books on a cash basis during the year. Steps 2 and 7 are lighter in that case. The reconciliation, holding account, and closing date steps are the same either way.

Your tax return may need to be filed on a particular method. Check with your tax preparer before switching, because a change of accounting method for tax purposes can require IRS consent. IRS Publication 538 covers accounting periods and methods.

Atlas Bookkeeper runs this close each month in your QuickBooks and sends you the close packet to approve; see pricing.

The same close is the starting point for year-end work such as 1099-NEC filing for 2026. For an add-on that has to close on the same calendar as the platform, see Add-On Integration: Mapping the Chart of Accounts in QuickBooks.

FAQ

Do I have to close the books every month in QuickBooks Online?

QuickBooks does not require it. Setting a closing date is optional. Without one, any user with access can change a month you already reconciled, and the next reconciliation will not start from the right balance.

What closing date should I use?

The last day of the most recent month you finished and reviewed. Move it forward each month.

Can I still change a transaction after the closing date?

Yes, with the password, if you chose that option. Any change to a closed period should be rare and documented, because it changes reports you may already have sent.

Why is my beginning balance wrong in the reconcile screen?

A transaction that was reconciled in an earlier month was edited, deleted, or un-reconciled. Fix that before reconciling the new month.

What records should I keep for a closed month?

Statements, reconciliation reports, the balance sheet and P&L for the period, and support for any adjusting entries. IRS Publication 583 describes the kinds of business records to keep.

Sources